The Pulsarlube M consists of a vertical feed pump and a microprocessor chip allowing an average operating pressure of 30bar(435psi). It is designed to ensure reliable lubrication and at the same time reduce lubrication expenses with cost-saving Service Packs.
The Pulsarlube M electromechanical automatic grease lubricator is primarily designed to compensate for the performance of conventional gas type automatic grease lubricator. It also offers superior advantages in cost competitiveness and user-friendliness.
The Pulsarlube M consists of a vertical self-priming pump, microprocessor control system, and large LCD display. This product is ideal for applications where: considerable back pressure in lube line exists, a precise lubrication is required, or a disposable gas type lubricator is not economical.
 |
30barUp to 8 lube points for multi-point / Max. 10m (33ft) for single point |
 |
LCDEasy to program with built-in LCD and simple button controls |
 |
-40°COptional Lithium Battery Pack available for low temperature usage |
 |
Service PackSubstantial savings from the use of replaceable grease pouches and battery packs |
Technical Specifications
| SPEC | Description |
|---|---|
| Grease Pouch Capacity | 60ml/125ml/250ml/500ml (replaceable) |
| Power Supply | DC 4.5V Battery Pack |
| Operating Pressure | 30~60bar (435~870psi) |
| Operating Temperature | Standard Alkaline Battery : -15˚C~60˚C (5 ˚F~140˚F) Optional Lithium Battery : -40˚C~60˚C (-40 ˚F~140˚F) |
| Dispensing Periods | 60ml : 1~12 month 125ml/250ml : 1, 2, 3, 6, 12 month & H (15 days) 500ml : 1, 2, 4, 6, 12, 18, 24 month & H (15 days) |
| Remote Installation | Max. 10m (33ft) with O.D. Ø6 tube |
| Multi-Point Installation | Max. 6m (20ft) with O.D. Ø6 tube (Up to 8 lube points) |
| IP Code | IP54 |
| Product Certifications | CE |
| Packaging | 10 Units/Case |
| Certification | Description |
|---|---|
| IP Code | IP54 |
| CE / Etc. | CE (CoC) |
