The Pulsarlube MS & MSP units offer the advantage of providing automatic lubrication to machinery that is infrequently or intermittently used by synchronizing itself to the equipment, thereby avoiding the problem of over lubrication.
The Pulsarlube MS electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MS will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. If the equipment is not operating, then the Pulsarlube MS goes into “stand-by mode” and does not dispense lubricant until the machine goes back into operation.
The Pulsarlube MSP electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MSP will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. Unlike the Pulsarlube MS, this product is a machine synchronized, externally powered unit and the power supply connected to the machine or PLC powers the unit. It is not necessary to replace the battery pack in the unit up to 5 years but the grease pouch should still be replaced after completion of each lubrication cycle set.
 |
SynchronizedDispenses a preset amount of lubricant only when equipment is in operation |
 |
LCDEasy to program with built-in LCD and simple button controls |
 |
60barUp to 8 lube points for multi-point / Max. 10m (33ft) for single point |
 |
Service PackSubstantial savings from the use of replaceable grease pouches and battery packs |
| SPEC | Description |
|---|---|
| Grease Pouch Capacity | 60ml/125ml/250ml/500ml (replaceable) |
| Power Supply | MS : DC 4.5V Battery Pack MSP : External Power Supply |
| Operating Pressure | 30~60bar (435~870psi) |
| Operating Temperature | Standard Alkaline Battery : -15˚C~60˚C (5˚F~140˚F) Optional Lithium Battery : -40˚C~60˚C (-40˚F~140˚F) |
| Dispensing Periods | 60ml : 1~12 month 125ml/250ml : 1, 2, 3, 6, 12 month & H (15 days) 500ml : 1, 2, 4, 6, 12, 18, 24 month & H (15 days) |
| Remote Installation | Max. 10m (33ft) with O.D. Ø6 tube |
| Multi-Point Installation | Max. 6m (20ft) with O.D. Ø6 tube (Up to 8 lube points) |
| Packaging | 10 Units/Case |
Product Certifications
| Certification | Description |
|---|---|
| IP Code | N/A |
| Etc. | N/A |
MSP Relay / MSP Power Supply Specification
| MS Relay | MSP VAC | MSP VDC | |
|---|---|---|---|
| Voltage Rate Input Range | AC100-480V, 0.5W/50~60Hz | AC Adaptor (100~220V) | DC-DC Convertor (12~24V) |
| Voltage Rate Output Range | Signal (Open collector type) | 5.0V, 2A | 5.0V, 2A |
| Power ON Indicator | Red LED | Red LED | Red LED |
| Relay Box Dimensions | 85mm (D) x 49mm (W) x 32mm (H) | 85mm (D) x 49mm (W) x 32mm (H) | 85mm (D) x 49mm (W) x 32mm (H) |
| Wire Length | Input 1m (3ft) / Output 4m (13ft) | Input 1m (3ft) / Output 4m (13ft) | Input 1m (3ft) / Output 4m (13ft) |
