The Pulsarlube PLC is specially designed to be fully integrated with a PLC system and offered in two types; MONTH and INTERVAL type.
Pulsarlube PLC electromechanical automatic grease lubricator is specially designed to be fully integrated as well as be synchronized to a PLC system. Kindly offers two types of PLC lubricator, Month and Interval type for wider range of usage.
For Month type, dispensing interval is calculated based on the lubricator and discharges only when the machine is in operation.
For interval type, dispensing interval is calculated by PLC and provides the selective modes for discharging a predefined lubricant amount. Pulsarlube PLC is ideal for lubricating a wide variety of robots, conveyors, roller-slide bearing, motor shaft seals, generators, pumps, fans and many other linear guide systems. In case of any malfunctioning, it allows the user to manage and obtain necessary data of the lubricator remotely from a central control unit (PLC panel) without having to go on-site.
 |
PLC ControlProgrammed to deliver fresh lubricant upon receiving a signal from the PLC |
 |
ConvenientBoth NPN and PNP connections are available |
 |
CommunicationIn case of any warning messages, the unit sends out a signal to an external alarm |
 |
2 TypesMON type dispenses at predetermined intervals and rates depending on the monthly setting Selected. INT type dispenses on command when a signal is received from the PLC, at the rate selected by the user. |
 |
Service PackSubstantial savings from the use of replaceable grease pouches and battery packs |
Technical Specifications
| SPEC | Description |
|---|---|
| Grease Pouch Capacity | 60ml/120ml/240ml/480ml (pre-set) |
| Power Supply | External Power Supply |
| Operating Pressure | 30~60bar (435~870psi) |
| Operating Temperature | -20˚C~60˚C (-4˚F~140˚F) |
| Dispensing Periods | MONTH type : 1~12 month INTERVAL type : 1, 2, 3…6 Mode |
| Remote Installation | Max. 10m (33ft) with O.D. Ø6 tube |
| Multi-Point Installation | Max. 6m (20ft) with O.D. Ø6 tube (Up to 8 lube points) |
| Product Certifications | CE, KC |
| 1 Per Stroke(@20˚C) | MONTH type : 0.34ml / Stroke (@20˚C) INTERVAL type : 0.34ml x Mode selected (@20˚C) |
| Wire Length | • To Lubricator : 150mm (0.5ft) • Extra connecting wires available for Purchase |
| Packaging | 10 Units/Case |
Product Certifications
| Certification | Description |
|---|---|
| IP Code | IP65 |
| CE Code | EN 61000-6-4:2007/A1:2011, EN 61000-6-2:2005 |
| KC | MSIP-REM-KLT-PLC480 |
